6 Steps How to Build a Storage Shed.

Review:
1 Star2 Stars3 Stars4 Stars5 Stars (9 voting, average: 2.33)
Loading ... Loading ...
  • Sharebar

Enough storage space is a dream of every homeowner. Of course, you can easily stuff your basement or garage with garden tools, building instruments and other important things. There you can have all the necessities without any mess in the house.

 

You can easily buy a kit or you can design your own shed to meet your requirements and some particular needs. The first variant is easier. The second one will take you much effort and it may cost more, but it is worth doing. So, in this article we’ll try to get to the bottom how to build a storage shed.

 

Main Stages of Shed Building.

Dividing the process of building into several parts makes it easier to fulfill. There are 6 steps which should be taken into consideration to cope with this task how to build a storage shed.

  1. 1. Making the foundation.
  2. 2. Building the floor.
  3. 3. Adding the walls.
  4. 4. Framing the roof.
  5. 5. Constructing the door and the windows.
  6. 6. Rounding it off.

 

Making the Foundation.

This step is the first and the most important one in the problem solution how to build a storage shed. The soil may move due to the weather conditions as the ground freezes and thaws. That’s why most sheds are built on blocks made of concrete. Lay out the four corners of the shed. Make 6-inches holes in the corners and in the middle of each long wall. Thus, you’ll have 6 depressions which should be equal.

Put about 4 inches of crushed rock into the depressions. Level and compact them. If the place is sloped, it is recommended to put the blocks on the upper side first. Thus, it will be easier to level them after. Put the concrete blocks into the depressions and after that (using any construction adhesive) clue them together to strengthen the construction.

 

Building the Floor.

Cut pressure-treated sill lumber to lie flush with the outer edges of the blocks. Add the band joists and adjust them to each other. Stagger the sill and band-joist lumber at the corners and strengthen them with nails. For further floor-building mark the 16-inch intervals. After that, fit the joists between the band joists. Secure them with nails driven through the band joists. Cover the floor with plywood. Secure it with 8d galvanized nails.

 

Building the Walls.

The next stage of solving the problem how to build a storage shed is adding the walls. As the deck is ready, you can use it as a surface for making the walls. Using joists form the sides, the wall’s bottom plate, its top plate and studs placed between 16 inches. Join the pieces with the nails. Using a nail-gun is preferable. When all the wall panels are ready, install them. Raise the walls and nail each to the decking below. Make sure, the form is correct.

 

 

Strengthen the framing and after that complete the walls using 4” x 8” sheets of siding for the exterior.

 

Framing the Roof.

Rafters cut from 2×6 boards should be attached to the headers. Using 1×6 strips adjust them to the top and tie together. After that you may nail the roof sheets on.

 

Constructing the Door and the Windows.

Make the holes for the windows and install them. To build the door, cut tongue-and-groove car siding (V-groove pine) to length. Square the assembly and screw 1 x 6 crosspieces at the center and near each end. Thus, you will strengthen the door.

 

Rounding It Off.

Using vinyl siding, complete the shed. Make cubbies, shelves and other sets of furniture inside for the sake of your convenience.

 

So, here is the guide how to build a storage shed. With some building skills and experience you will make the procedure easier. Constructing a shed according to your needs will help you to maintain order in the house.

 

Where to put all unnecessary stuff or how to build a shed?

                                                                               How to build a shed door