Vital Tips on Building Shed Door and Choosing Proper Materials

Review:
1 Star2 Stars3 Stars4 Stars5 Stars (5 voting, average: 1.80)
Loading ... Loading ...
  • Sharebar

What are sheds built for? They store gardening supplies and tens of different objects needed for outdoor use. Normally, there are no problems, while building a shed, but when it comes to shed door, many of us get really frustrated: what materials to use, how to build and install are the primer questions asked. So, would you like to know the answers to these questions?

Types of Doors: how to Make the Right Choice?

If we are speaking about the types of doors that are used on a shed, it should be noted that they vary greatly. Your choice should depend on the design of the building, as well as on the security you require.

Today’s market offers four primer shed door designs:

-double doors

-sliding doors

-overhead doors

-personnel doors

How to choose a proper type? You are to decide what you need the door for. If you are aiming at complementing the overall appearance of the surrounding area, as well as of the shed itself, you are to think of original designs and forms. But in this case cost can be the main reason for concern.

Keep in mind that extraordinary doors are hard to build and install, so you will need extra money and time, which may be problematic to get. Weigh upon all pluses and minuses and make your choice.

Of course, these doors can be bought, as it is really difficult to make them on your own, if you aren’t a real specialist. We would like to pay your attention to building shed doors on your own. Believe it or not, but it is quite easy, if you follow the instructions we provide.

Building the Door for a Shed

1. first of all you are to select appropriate boards to build the door of necessary height and width. As a rule, these boards should be 125 mm wide and from 20 to 25 mm thick;

2. secondly, you are to pick the ledges of the same width (125 mm), but a little bit thicker. These will be the door’s width minus the depth of 2 beads in the frame and minus 5 mm allowance on the sides;

3. before assembling, prime the timber, as grooves, tongues, as well as insides will be inaccessible, after the door is assembled;

4. start building the door positioning three ledgers you have chosen on the outside batten’s back and then screwing them securely to this batten with the help of two screws or three nails;

5. after that, turn the batten over to ensure that these three ledges lie flat on the bench. The rest of the battens should be placed in position on the ledges and simply cramped up;

6. nail the battens to the ledges using three or five nails in a zigzag manner. What does the number of nails depend on? Normally, it depends on the width of the batten;

7. to ensure a relatively greater security, drive in the nails on the skew and in opposite directions. Professionals state that nails are to be clenched, if the owner intends to make the door really strong. From the aesthetic point of view, this makes a mess of the door’s back, BUT there is also a great plus – it adds to the strength of nails fixing;

8. make sure the nails are punched and the holes are stopped. Keep the brace’s ends back about 65 mm from the ledge’s end. While installing the braces like this you will prevent the splitting of small potions of the ledge, caused the thrust from the braces;

9. after the braces are well-fitted, the battens are nailed to them in the same way.

Is the Choice of Materials Important?

Yes, it is. As a rule, shed doors are made of wood, however, some owners prefer having aluminum or metal installed on them. Today wood is regarded to as the easiest way to make shed door our. Of course, you can cover it in metal siding. What’s the effect? They are going to be thick enough to maximize storage capacity and security of the shed.

Choose the proper material and follow our instructions to build shed door in the easiest way!
How to Build a Shed Door in 7 Easy Steps

How to install a door frame